500000 Square Meter/Square Meters per Year exterior siding panels
Packaging & Delivery
1. Free packing (with normal pallet and packing belt)
2. Standard exporting packing (wrapped with plastic thin film,wedge protect and good pallet)
3. Packing size: 1500-3000*610*1000mm
4.Loading: 18 pallets per 20' container
Easily Work Time saving Wall Material lowes exterior siding panels for house building
Application: Any interior and exterior partition on steel or concrete structure building. Or factory, hotel, school, hospital, office, shopping mall, apartment, gym, conference center, and rebuilding project.
Advantages of Rigel Panel:High Intensity,Solid Heart,Thin body,Waterproof,Fireproof,Sound Insulation,Heat presercation,Dampproof,Quakeproof,can be nailed,hanged,sawed,can be faced to the ceramic tiles.
All the materials have no pollution in produce, no waste in installation
The core material of Rigel panel is the EPS polystyrene grain which has good heat preservation function,can reduce the cost of the electric. It is the best choice for energy saving.
The weight of the Rigel wall panel is 10 times lighter than the traditional blocks
Thin body of Rigel wall panel can save the area 8-10% compared with the traditional thick blocks.
At the same time, the construction cost can be reduced.
The test shows that make a water container with Rigel wall panel and fill the water.
Without any waterproof facing after one year and the outside of the pool keep dry
and no water mark. There is no bead on the surface in the wet climate
Rigel panel has good fireproof performance. Tested by the National Construction Material Quality Supervision and Inspection Center, the fireproof limit is 4 hours and national level A incombustibility
Rigel wall panel can reduce 39db-50db
Rigel wall panel make it easy to clean up the fabricating yard after installation
Rigel wall panel is larger and lighter than the traditional block, it can reduce the weight
on the foundation, so when earthquake comings, the panel will not easily destroyed.
Achieved the assembly installation, the speed is 6-7 times higher than the traditional blocks, and the worker can do more in the same time
Stucture of exterior siding panels :
Technical Specifications of exterior siding panels :
60mm 90mm 120mm
60mm 90mm 120mm
≥5 ≥ 5 ≥5
≥8 ≥10 ≥15
Anti-bending damage load
≥1.5 ≥1.5 ≥1.5
≥3 ≥3 ≥3
Compressive Strength /Mpa
≥3.5 ≥3.5 ≥3.5
≥5 ≥5 ≥5
≥0.80 ≥0.80 ≥0.80
≥0.80 ≥0.80 ≥0.80
Surface Density kg/m²
≤70 ≤90 ≤110
≤45 ≤60 ≤75
Moisture Rate a/%
Drying Shrinkage value /mm/m
≤0.6 ≤0.6 ≤0.6
≤045 ≤0.5 ≤0.5
Single point hanging strength
≥1000 ≥1000 ≥1000
≥1200 ≥1300 ≥1500
Sound insulation capacity
in the air /Db
≥30 ≥35 ≥40
≥35 ≥40 ≥45
Fire proof limit /h
≥1 ≥1 ≥1
≥3 ≥4 ≥4
Heat transfer coefficient b/w/m2.k
≤0.8 ≤1.0 ≤0.45
≤1 ≤1 ≤1
Material of exterior siding panels :
Working Process of exterior siding panels:
Packaging & Shipping
Package of exterior siding panels:
Exterior siding panels producing factory:
Wuhan Rigel Imp&Exp Trading Co.,Ltd is one of the biggest manufacturers in the East Lake NewTech Development Zone of Wuhan, integrating the development, production, sale and installation of light weight energy saving panels and relevant machines.The production base is located in the Ezhou Economical Development Zone. The company invested in more than RMB15,000,000,the factory area is 30,000 square meters, and annual output can reach up to 500,000 square meters of panels and 100 sets of machines. Now there are more than 200 professional personnel for Research, Management, Sale and Construction and can provide excellent technical support and after-sales service.
♥ If you want to know more information about our products welcome to contact us in any time, And welcome to our company!
Lydia is at your service in 24 hours.
FAQ of exterior siding panels
1. Q: Since when your company started producing this product? What’s the annual output now?
A: We start the production of eps&cement sandwich panel in 2010.The annual output can reach up to 500,000 sq meter.And we begin the oversea business in 2011.
2. Q: Could you introduce the production procedure? What are the machines required?
A: It is one time compound. Boiler provides heat to EPS expander for expanding EPS foam to be about 60 times bigger size, Mixer mix the raw materials and inject into Mould.
3. Q: What are the advantages of your panel?
A: Our panel’s outstanding advantages are light weight, heat insulation/preservation, waterproof, fireproof, Sound insulation, fast construction and so on.
4. Q: Can you produce 3m panel or even longer?
A: Yes, we can produce the panel with length between 1.5m to 3m. Our standard size and suggested size is 2.27m.
The reasons are:
1. It meets the width of container 2.3m, can maximum utilize the loading space.
2. The wall height in building differs due to the beam, it’s impossible for each piece of panel to reach the top.
5. Q: Which kind of project and building your panel can be used?
A: Our panel, as a prefabricated non-load bearing wall panel, can be widely used as internal wall, external wall, floor, roof on steel or concrete structure of project such as hospital, hotel, school, office building, apartment and so on, for new construction, addition or renovations.
It is also quite suitable and competitive to use our panel to build villa, lodging house at a big quantity.
6. Q: Can your panels be used as floor or roof? Any suggestions for that?
A: Yes, we suggest to use 120mm or thicker panel as floor. If there is a distance between the ground and floor, the span between the supports below panel should be less than 1m.
It is not usually and recommendable to use our panel as roof. The corrugated roofing iron or tiles are better choice. If use our panel as roof, it needs to take some waterproof measures.